First off we have a little dual 10" subwoofer available for sale. Its a nice little unit for a great price. See specials page for details.
Second, we have a new subwoofer available now, the 21.0LX that bridges the gap between the 21.0 and the 21.0L, in size, price, and overall performance. It excels in ultra high output with very low distortion and provides more output than the 21.0L over 40hz, and more output than both the 21.0 and 21.0L under 30hz, along with lower overall distortion than anything else we have ever offered, making it the best sounding subwoofer we have designed to date, and with the proven reputation our products have in this aspect already this really is an accomplishment we are very proud of. Please contact us for details and/or to place an order before the product page is published, this first pair is being finished up this week so we will have the product page up within the next few weeks. The driver used in this new subwoofer is also available as a drop in upgrade for existing 21.0L's, providing everything the 21.0LX offers other than the smaller cabinet size.
Third, we are working on 24.0, using the same motor as the 21.0LX, and the bigger amplifier from the 21.0 it will be the same physical size as the 21.0L, and will be priced at $6400 USD. The design is finished and we are just working on final testing. Please contact us if you would like more information and/or to "preorder" this new subwoofer.
Fourth, We are working on something even more extreme, as a new "flagship subwoofer" it has been on the drawing board for years, but due to the level at which this design pushes the envelope there were many details to work out as almost everything for it requires custom tooling and new manufacturing methods to work, we have worked out almost everything and are about ready to start working on it. It shares two traits with the 24.0 mentioned above, that is it is a 24" driver, and the cabinet can be about the same size. Similarities to anything else end there. Here is a general rundown of the features;
Driver would be underhung with;
Underpole Neo magnets, conical segmented ring system with venting through, and 4" diameter pole vent, think halfway between neo radial and the common under pole slug, so the pole vent size is kept large for low turbulence, magnet volume is high, and is kept far enough from the coil to stay cool.
10" diameter voice coil, quad 4ohm flat wire.
Full aluminum sleeve over pole, maybe even aluminum sleeve outside the coil too, I think we can keep the normalized inductance to 1mH/ohm or less so upper bass performance should not be compromised even considering the massive coil.
Solid carbon fiber cone/former/dustcap, as one piece structure.
Custom machined modular aluminum basket
The cabinet would be about 28" wide 28" high 24" deep with curved sided cabinet nice finish etc. The amplifier would be a 4 x 2400 watt unit, one channel per coil, so 9600 RMS total, we have the rack version from the 18.2 or we can do a plate version built in like we used on some custom 21.2's we did last year. Price will be around 15-20,000. If anyone is interested in getting involved with this project please contact us, and or join the discussion here on Databass.
Finally, We are also running very low on the veneer clearance specials, we are down to only enough of each for one subwoofer or a small pair of speakers.
Well we decided to change some of our changes mentioned in the last post. We have decided on a full new selection of standard finishes for all products, some product pages are done now, see 18.0 page for the new lineup. The rest will be done over the next few days. Some prices are being adjusted as well, nothing to major though. We are also finally getting to filling out the veneers page showing the standard options as we as pictures of custom finishes. The pictures are captioned so you can see what each one is. I have also gone through and captioned all the pictures in the gallery page.
Also coming up very soon is a Veneer clearance sale, some surplus veneers we have been gathering up we will be offering for some products at a discount.
We have made some decisions to change a few things around. First we are going to be putting the master slave system option as an option in the main product page for each subwoofer with that option available. This should clean things up a bit, the 21.0L is done and we will work on the rest over the next week or so.
Next we are going to make a few wood veneer, with solid wood inlay corners, options as standard for the upper end products, 8.2P, 8.6P, 18.2, and 21.0. For all other products we will reduce the number of "base price" bamboo finish options to the Natural Bamboo with the 4 standard colors, but we will then also reduce the cost for the first tier of wood veneer options.
The first pair of 21.0L's are going to be completed soon. The Intro Pricing will be available until just after they are finished pictures are posted. This first pair is being finished in high gloss Mahogany Crotch. Here are some pictures in the works.
Well, so far this year has been so busy we have not offered any specials, good news though as production goes up we can handle more so time for a sale. For the next two months we are going to offer the 8.2P active speakers, fully designed and built to order in house by yours truly, for %20 off. Use Coupon code "Summer"
We are also going to have a demo 21.0 available very soon, it is the unit recently tested by Data Bass, for a hefty discount of %30. It is finished in Brindle bamboo Red stain, and has been tested and reviewed as well as demoed at an audio show, so it does show some wear.
Test results are up for our 21.0 on Data-Bass. Came out as just as we expected.
This started off as a custom project, but the results were so spectacular we just have to make it a standard product. This is a main speaker with a range of 80hz-30khz. Featuring dual 12" bass drivers in a front loaded horn, with a co-axially mounted waveguide/horn loaded planar mid tweeter. They are powered with our 6x500watt amplifier with DSP optimized crossover.
Contact us for more details and to order.
We have been working on these a while, very customized, and they are finally complete and shipping out. Carbon fiber wrapped with clear anodized aluminum face plate and top/bottom plates.
We now have our very own subforum section at AVS. Please stop by and join the discussions, Here
Also the first production 15.H subwoofers are finished and starting to ship out.
And its also new equipment day at Funk Audio.
Well as usual the fall/winter is getting busy for us, production is ramping up but lead times are climbing as well. For most products we are up to around 10 weeks, more for custom orders. Here are some pictures of some current projects in the shop. Production on the 15.H front loaded horn subwoofers, and the custom 8.2P's in carbon fiber/aluminum that have been waiting for parts, that will be arriving soon, are being finished up. We made just two small changes to the 15.H from the prototype; we moved the driver access panel to the back from the side and cut our logo in the front brace.